"Just Add Creativity...."™

Findings - Bails, Tags, Crimps & Jumprings etc.

Page 1
Page 2&3 Page 4 Page 5 Page 6 Page 7
Clasps Toggles & Magnetic Clasps Headpins, Eyepins, Earrings, Pendant Loops

Bails, Tags, Calotte ends, Cord caps, Crimps, Jumprings, Splitrings, Ribbon Clamps

Heishi, Tubes, Tubular beads, Spacers Chain, Wire, Bracelets
Sterling Snap Bail
Sterling silver snap bail. 6x2x0.4mm. Used to link pendants to jewellery in a professional manner. To use, gently ease the bail apart to insert your pendant loops and then ease back with your pliers. Loop through chain or ribbon.
Marked '925'
£0.65 each

STF-6

Qty


Click image to see applications
Sterling Silver Pendant Bail
1 Sterling Silver Pendant/Charm Bail; simply squeeze the two halves together with the hole of your pendant in-between to form a hanging loop - work well with the small Swarovski hearts, baroque fittings, discs etc. Measures approx. 8x4mm.
Prongs each approx 2mm long, 1mm wide.
1.20 each

STF-353

Qty
Sterling Silver Silver Bail
1 Sterling Silver Bail Measures approx 12 x 4.5mm. ring is approx 4mm diameter. Stamped '925' on top of bail Perfect for making a pendant from one of our Murano glass heart beads. The loop does open, but take care not to damage it, or wire driectly to the closed loop.
1.75 each

STF-338

Qty

Click image for application
Sterling Silver 'Add A Bead' Pendant 14mm
1 Sterling Silver 'Add A Bead' Pendant - the bottom silver bead-nut unscrews to allow you to place your beads on the wire, suitable for beads upto 14mm. The top bead is loose and will slide down against the top of the bead. The central wire is approx. 1 mm diameter. the top loop has an internal diameter of 3mm.
Note, the parts are small and will require dextrous fingers to assemble!
4.65 each

STF-459

Qty
Sterling Silver 'Add A Bead' Pendant 18mm
1 Sterling Silver 'Add A Bead' Pendant, suitable for beads upto 18mm.The central wire is approx. The top loop has an internal diameter of 4mm.
4.75 each

STF-431

Qty
Sterling Silver 'Add A Bead' Pendant 20mm
As above but suitable for beads upto 20mm.
4.85 each

STF-432

Qty
Sterling Silver 'Add A Bead' Pendant 30mm
As above but suitable for beads upto 30mm.
5.10 each

STF-433

Qty

Click image for application
Pair 'Add A Bead' 14mm with Earwires
1 Pair Sterling Silver earwires with Sterling Silver 'Add A Bead' Pendant mounts for beads upto 14mm - the bottom silver bead-nut unscrews to allow you to place your beads on the wire. The top bead is loose and will slide down against the top of the bead. The central wire is approx. 1 mm diameter.
£10.75 per pair

STF-451

Qty
Sterling silver necklet tag
Used to finish off bracelets and necklaces professionally by joining your jump or split ring to the tag and the tag to your clasp. One side marked '925'. Use them for lmarking your sterling silver jewellery or as the joining loop for a trigger clasp. Measures approx 8x4mm.
0.50 each

STF-469

Qty

'925' Sterling Silver Oval Tag
1 '925' Sterling Silver Oval Tag; stamped '925', ideal for marking your sterling silver creations as such!. Measures approx 7mm x 6mm and 0.5mm thick, with 4mm diameter 'open' ring (meaning you can open and close it with pliers).
0.95 each

STF-339

Qty
Sterling Silver Calotte/Necklace Ends
10 Sterling Silver Calotte/Necklace Ends; pass thread through the hole in the bottom of the 'cup', knot your thread thickly enough to ensure it does not slip back through the hole, add a dab of glue, close the two ball halves gently and ensure that the loop makes a good fit before adding your clasp/findngs.
Also available in gold filled
3.75 for 10

STF-49

Qty

Sterling Silver Tiny Crimp End Caps
10 Sterling silver crimp end caps. 0.46mm internal diameter. These tiny end caps are suitable for terminating beadalon wires upto 0.018" diameter. End hole is 1.5mm.
2.50 for 10

STF-264

Qty

Click image for applications
Sterling Silver Cord Endcaps
Sterling Silver Cord Endcaps for Leather, Suede & Satin Cords.
Slip these onto the end of the cord then squeeze the end of the silver endcap together, then use jump rings and a clasp to complete the clasp and fittings.
(Cord is available in Stringing)
2 Sterling Silver Cord Endcaps; inside diameter 2mm.
Choose these for our Leather and thin rubber cords.
£2.10 for 2

STF-100

Qty

2 Sterling Silver Cord Endcaps; inside diameter 2.4mm.
Suitable for our Suede and 3mm 'Rat-Tail' Satin cords.
£2.50 for 2

STF-59

Qty


Click image for applications
Smallest Sterling Silver End Crimps with Ring.
Use these to join foxtail or other beading wire to your clasp - simply crimp down onto your wire or foxtail chain and then attach your clasp fittings.
10 Smallest Sterling Silver End Crimps with Ring; 0.65 mm Inside Diameter; perfect for single strands of sterling silver 'foxtail' wire, STF-259 or for Beading Wire (Beadalon, Acculon etc); attach your findings to the end ring.
8.50 for 10

STF-243

Qty
Small Sterling Silver End Crimps with Ring.
10 Small Sterling Silver End Crimps with Ring; 1.2 mm Inside Diameter; perfect for thin leather cord etc. These just need to be crimped flat in the middle - no glue or crimp folding needed - easy to use, strong and sturdy with an attractive appearance. Suitable for 2 strands of foxtail.
8.50 for 10

STF-224

Qty
Medium Sterling Silver End Crimps with Ring
Use these to join foxtail or other beading wire to your clasp - these larger ones are great for multiple strands of foxtail - simply crimp down onto your wire or foxtail chain and then attach your clasp fittings.
2 Medium Sterling Silver End Crimps with Ring; 2 mm Inside Diameter; various possible uses for these - end crimps suitable for chain, ribbon, leather etc. You can use these for faux suede or both rubber cords.
3.25 for 2

STF-223

Qty
Sterling Silver Fold Over Crimp Cord Ends
2 Sterling Silver fold over crimp cord ends. Suitable for cords upto 3mm (width at base of crimp) with 'fold overs' approx 5mm long. 1.5mm hole.
Marked '925'.
£2.35 for 2

STF-253

Qty
Sterling Crimps
Sterling silver crimp beads..these are the 'crush' beads that you use to make floating or illusion necklaces and bracelets or use to finish your beading whilst adding your clasp findings - you will find a lot of other uses for these small beads, consider using them for spacers - these are small hole crimps suitable for thin diameter stringing materials such as the thinner Beadalons etc.
2mm diameter with 0.8mm hole; take a look at the 'Hints and Tips' Section to see how to use these.
7.95 for 50
STF-13

Qty
Sterling Silver Tube Crimps
With a 1mm hole for multiple passes of thread; take a look at the 'Hints and Tips' Section to see how to use these.
Illustrated together at the same scale for comparison.
Sterling Crimps - Medium
100 Sterling Tube Crimps - Medium - 1mm length,1.3mm hole.
£7.75 for 100
STF-43

Qty
Sterling Crimps - Large
50 Sterling Tube Crimps - Large - 2mm length, 1.3mm hole.
£5.50 for 50
STF-42

Qty

Click image for applications
Sterling Silver Crimp Covers
10 Sterling Silver Crimp Covers - these cover and tidy up your 2mm round and small tube crimps - simply crimp and fold as normal (see the Hints and Tips Section of the site if you need help on this), then as a final neatening, place one of these 'C' shaped covers over your crimp and close the 'C' gently with your pliers - very professional!
Also available in gold filled
£2.75 for 10

STF-154

Qty

The medium and light weight sterling silver jump rings below are a cost effective option, excellent for chain maille work and well suited for most jewellery making applications.
The heavy jump rings are made from thicker sterling silver wire which means they are durable and robust. Because they are made from thick wire, they are less likely to distort during wear and use. These are perfect for heavy weight / large size projects.

When using jump rings ease them apart with your pliers with a sideways 'scissor' motion; please see the 'Hints and Tips' section for how to correctly open and close jump rings.

Light Weight Sterling Silver 4mm Jump Rings
50 Light weight sterling silver 4mm jump rings. 4mm outside diameter, 0.6mm wire.
4.95 for 50

STF-402

Qty
Medium Weight Sterling Silver 4mm Jump Rings
50 medium weight sterling silver 4mm jump rings. 4mm outside diameter, 0.75mm wire.
5.95 for 50

STF-403

Qty
Medium Weight Sterling Silver 5mm Jump Rings
20 Medium Weight Sterling Silver 5mm Jump Rings. 5mm outside diameter, 0.7mm wire.
£2.95 for 20

STF-460

Qty
Heavy Weight Sterling Silver 5mm Jump Rings
20 Heavy Weight Sterling Silver 5mm Jump Rings. 5mm outside diameter, 0.9mm wire.
£3.25 for 20

STF-404

Qty
Medium Weight Sterling Silver 6mm Jump Rings
20 medium weight Sterling Silver 6mm Jump Rings. 6mm outside diameter 0.8mm wire.
£5.25 for 20

STF-443

Qty
Heavy Weight Sterling Silver 6mm Jump Rings
20 Heavy Weight Sterling Silver 6mm Jump Rings. 6mm outside diameter, 1mm wire.
£6.95 for 20

STF-405

Qty
Heavy Weight Sterling Silver 8mm jump rings
Sterling silver heavy jump rings, 8mm oustide diameter, 1.1mm wire.
£3.25 for 10
STF-138

Qty
Sterling silver soldered rings - great for the other end of your closure to your clasp when making bracelets or necklaces - an excellent alternative to split rings, and perhaps that bit more professional for finishing off - there is no way to open these (unless you cut through them!) so they they won't let a piece of jewellery down - these are good for where you need a circle without joins to string things onto; possible use would be individually wiring charms to jewellery with headpins or wire.
Sterling Silver 5mm Circles
10 sterling silver 5mm soldered rings, 3mm inside diameter, 1mm thick.
3.50 for 10

STF-434

Qty
Sterling Silver 6mm Circles
10 sterling silver 6mm soldered rings, 4mm inside diameter, 1mm thick
4.60 for 10

STF-360

Qty
Sterling Silver Twisted Soldered 7mm Rings
10 Sterling Silver Twisted Soldered 7mm x 1.1mm Rings - great when you need something more secure than a jump ring.
£3.95 for 10

STF-137

Qty
Sterling Silver 6mm Split Ring
10Sterling silver split ring 6mm, these are great to use as the connections for your sterling clasps or to add beaded charms made with headpins or wire; lots of other uses too; the split ring has the added benefit of not having the 'gap' that is typical of jump rings, however hard you close them; imagine a key ring (without keys) scaled down and you have your split ring; for splitring pliers, see the tools section; please see the 'Hints and Tips' Section for how to use split rings.

0.55 each
STF-16

Qty
Sterling Silver 8mm Split Rings
10 Sterling silver split rings 8mm

0.65 each
STF-450

Qty
Sterling Silver Cord End Findings Kit
Enough parts to finish your necklace or bracelet - just add glue.
(Cord is available in Stringing)
. Consists of 1 Bolt Ring Clasp, 2 2.0mm Cord end caps & 2 split rings.
£3.55
Suitable for 2mm leather and thin rubber cords.

STF-101

Qty
. Consists of 1 Bolt Ring Clasp, 2 2.4mm Cord end caps & 2 split rings.
£3.95
Suitable for our Suede and 3mm 'Rat-Tail' Satin cords.

STF-92

Qty
Back Page 1, 2, 3, 4, 5, 6, 7 Next
Page 5